Elektooniline momentvõti 0,6-12Nm 1/4" nurga/kraadi mõõtmise võimalus, metallist korpusega
814,01 €
• Torque units in N·m, kg.cm, dN·m, ft.lb, lb.in (cN·m and in.oz depending on range) and angle units in degrees
• Torque range covers from 0.6 to 135 N·m and from 5.3 to 1200 in.lb
• It can be used CW and ACW at temperatures between 5 ºC and 42 ºC
• Memory capacity of 50 readings and up to 10 presets
• Torque, angle, torque then angle and preset modes
• Counter
• Data and set value retention during battery exchange
• Programmable automatic shut-off time
• More advanced configurations and settings available in the user manual
• Accurate to ±2% CW and 3% ACW between 20% and 100% of max torque
• Visual (dual LEDs + backlit LCD display), audio and vibration signal
• ¼" square drive 40-tooth fixed ratchet head
• All in a metal body and bezel for higher strength and duration
• Metal handle with reverse threaded end cap to enclose AA alkaline batteries (included)
• Supplied in sturdy blow mould case
• Supplied with a factory declaration of conformity and CE marking
• 2014/30/EC, ISO 6789
• Made in USA
• Torque range covers from 0.6 to 135 N·m and from 5.3 to 1200 in.lb
• It can be used CW and ACW at temperatures between 5 ºC and 42 ºC
• Memory capacity of 50 readings and up to 10 presets
• Torque, angle, torque then angle and preset modes
• Counter
• Data and set value retention during battery exchange
• Programmable automatic shut-off time
• More advanced configurations and settings available in the user manual
• Accurate to ±2% CW and 3% ACW between 20% and 100% of max torque
• Visual (dual LEDs + backlit LCD display), audio and vibration signal
• ¼" square drive 40-tooth fixed ratchet head
• All in a metal body and bezel for higher strength and duration
• Metal handle with reverse threaded end cap to enclose AA alkaline batteries (included)
• Supplied in sturdy blow mould case
• Supplied with a factory declaration of conformity and CE marking
• 2014/30/EC, ISO 6789
• Made in USA
Saadavus:
Tarne 14 tööpäeva
SKU
TAW1412M
BAHCO - aastast 1886
Bahco on turuliider ja premium-klassi tööriistabränd, mis pakub kohandatud lahendusi ning vastab kõige tulemuslikumate spetsialistide vajadustele rohetehnoloogia, ehituse, autotööstuse, metallilõikuse ja tööstuse valdkondades.
Bahco on leiutanud mõned maailma olulisemad tööriistad, nagu reguleeritav toruvõti, reguleeritav mutrivõti, mitmekomponentsed käepidemed ja Sandflex® saed, omades enam kui 400 registreeritud patenti ja mitmeid auhindu.
Rohkem kui 24 000 tootega ulatuslikus tootekataloogis pakuvad Bahco tööriistad ainulaadset kombinatsiooni tipptasemel tehnoloogiast, kasutajakesksest disainist ja enam kui sajandipikkusest kogemusest.